Scott Pro2000 Combined Filters (CF) 22 A2-P3
Scott Safety Pro² Filter A2P2/P3* - Scott Safety Pro² combination filter for organic gases & vapours, solid & liquid particles. Particle, gas and combined cartridges from the Scott Safety Pro² range use a bayonet locking mechanism and feature unique protective covers with recessed inlet grills. The covers protect the filters from splashes and sparks. Filters are positioned with the inlet grills to the rear for good balance and an unobstructed field of vision. The Scott Safety P2 Pad and Retainer system is used in conjunction with the Scott Safety Pro² gas and vapour filters to provide P2 protection and extend filter life.
- Pack of 2 filters
- Gases and vapours from organic compounds with a boiling point higher than 65°C and solid and liquid hazardous particles. eg. Toluene, Xylene, MEK, Benzene, Alcohols, Dusts, mists, fumes, toxic particles
- Weight: 142g
- Storage Time: 5 years
Compliance: Certified to AZ/NZS 1716:2012
*P2 when used with Profile² Half Face Respirator and P3 when used with the Promask Twin Full Face Respirator
NOTE: The filtering device may be used only if the oxygen content of the air is 19.5 - 23.5 vol.%. The contaminants in the air must be identified and measured. Airborne contamination levels must be compared with acceptable limits. The maximum exposure limits must not be exceeded! The filtering device must not be used if the environment and contaminant are unknown or if the composition of the atmosphere is likely to change disadvantageously. In case of doubt, SCBA or airline, which function independently from the atmosphere, must be used. Gas filters do not protect against particles and particle filters do not provide protection against gases or vapours. In case of doubt, use combined filters.